MAKE WAY FOR THE FIRST ACTIVE HEMOSTATIC POWDER

MAKE WAY FOR THE FIRST ACTIVE HEMOSTATIC POWDER

EASY AND READY TO USE

Before surgery, ensure to have at hand:

  • HEMOBLAST™ Bellows AND
    ITS 10CM CANNULA
  • NORMAL SALINE
    AT ROOM TEMPERATURE
  • SYRINGE WITH
    NORMAL SALINE
  • LAPAROTOMY
    GAUZE/PAD

How to use HEMOBLAST™ Bellows?

Dry

1. When witnessing a persistant bleeding

2. Ensure the wound surface is as dry as possible before application (use gauze/pad or suction)

Apply

3. Apply the hemostatic powder to the bleeding site by squeezing the bellows

4.Cover the entire bleeding area with powder

Wet Lap Pad

5. Immediately apply wound appropriate pressure using a wet gauze/pad*

6. Hold for at least 2 minutes*, then gently lift the gauze/pad* and inspect the area

7. Remove excess powder by gentle irrigation

8. Clot formation with a transparent layer will have occurred

If hemostasis has not been achieved, repeat steps 2 to 7 or use an alternative method of hemostasis treatment.

Refer to IFU for contraindications, warnings and precautions.

Find out more about HEMOBLAST™ Bellows

* Clinical data suggest hemostasis is best achieved after applying a wet lap pad for approximately 3 minutes, then gently lifting the lap pad using gentle irrigation with saline.(1)

1. HEMOBLAST™ Bellows IFU : E-MR-222-V3.0.

Legal Information: HEMOBLAST™ Bellows - Implantable Medical device Class III for surgery reserved for use by qualified healthcare professionals, reimbursement depends on each country.
Read the instructions for use on the packaging carefully before use. CE0086: BSI - Manufacturer: Biom’up SA France.